HJ ENG - PRODUCTS > Flat Cable

KR EN

PRODUCTS

Flat Cable

Bend radius	Recommended bend radius of the cable used (at least six times the outside diameter of the cable)
Acceleration	~4G
Temperature range	-10°C~80°C
Specifications	e-PTFE insulated, Low Particle PVC

Customized specifications

· Cable installation criteria: Block installation length

Block installation length (mm) = S/2+ πR + 2C + α

If the fixed end is the center of the stroke, the calculation result should be rounded up by one digit.

S	R	C	α
Moving stroke (mm)	Bend radius (mm)	Clamp length (mm)	Margin length

α	S = up to 500 mm: 30 mm or more
	S = 501-1,000 mm: 50 mm or more

· Cable installation criteria: How to secure the cable

· OPTION

· Please consult in advance if you review the use outside of the range of the recommended conditions.
· To sustain the bending performance of the cable, it is necessary to secure the same recommended bending radius as before. So, please be cautious.
· Since it is a type that is used in the cable bare, a clamp for fixing is not provided.

Model		BT15-D075-2	BT15-D05-2	BT15-D02-2P
Item		(0.75/1C) × 2	(0.5/1C) × 2	(0.2/1P) × 2
Conductor	Size(mm²)	0.75	0.5	0.2
	Material	Tinned Annealed Copper	Tinned Annealed Copper	Tinned Annealed Copper
	Construction	7/20/0.08	3/33/0.08	40/0.08
	Dia. (approx.mm)	1.24	1.14	0.58
Insulation	Material	ETFE	ETFE	ETFE
	Thickness (approx.mm)	0.25	0.25	0.2
	Dia. (approx.mm)	1.74	1.64	0.98
Twisting	Dia. (approx.mm)	-	-	2.0
Shield Tape		-	-	2.0
Shield (Winding)	Material	-	-	2.0
Shield (Winding)	Wire Diameter (approx.mm)	0.08	0.08	0.1
Tape		Aluminum Polyester Tape	Aluminum Polyester Tape	Aluminum Polyester Tape
Unit Diameter	Dia. (approx.mm)	(a) 2.0	(b) 1.9	(c) 2.4
Flat Cable Unit		(a) × 2	(b) × 2	(c) × 2
Jacket	Material	-	-	2.0
Jacket	Overall Diameter (approx.mm)	4.0 × 6.0	4.0 × 6.0	4.0 × 6.0
Cross-Section of Cable *NOT TO SCALE